超聲波清洗設備怎么應用于汽車修理行業？很多人對于這個問題很是迷茫，那么下面我們就來講講這個問題吧，只有進行充分的了解才能更多的使用清洗設備工作。

　　How is ultrasonic cleaning equipment applied to the automotive repair industry? Many people are confused about this problem, so let's talk about this problem. Only with a full understanding can we use more cleaning equipment.

　　如今在汽車維護和修理中出現了一些新技術、新工藝、新材料和新設備，不僅可以提高汽車的維修速度和質量，而且能增強汽車的可靠性，延長汽車的使用壽命，同時還可以降低汽車維修消耗、減少維修成本，使企業得到較高的經濟效益。

　　Now in the car maintenance and repair of some new technology, new technology, new material and new equipment, not only can improve the car's speed and quality of maintenance, and can enhance the reliability of the car, prolong the service life of the car, at the same time also can reduce consumption of vehicle maintenance and repair, reduce maintenance cost, make the enterprise to obtain the higher economic benefit.

　　汽車維修時需要清洗零件，其目的一是為了對零件檢驗、分類，便于發現零件的損傷并及時加以修復；二是為了保證維修裝配質量。利用超聲波技術的物理清洗作用及清洗介質的化學作用兩者的完美結合，并優化選擇超聲頻段及功率密度，實現對各種零部件內外部油污、積炭、膠質等污物充分、徹底地清洗。

　　Car maintenance needs to clean parts, its purpose is to check parts, classification, easy to find parts of the damage and timely repair; The second is to ensure the quality of maintenance and assembly. Using the perfect combination of the physical cleaning function of ultrasonic technology and the chemical action of the cleaning medium, and optimizing the selection of ultrasonic frequency band and power density, to achieve a full and thorough cleaning of all kinds of internal and external parts, such as oil, carbon, glue and other dirt.

　　當被清洗工件浸沒于清洗溶液中時，超聲波清洗設備的超聲波以強大的空化效果作用于工件的內外表面，故其特別適合于復雜多孔、不能有硬物擦洗的光潔表面。國外還采用微波清洗技術，使被清洗的零件在微波的作用下，表面形成空穴，再使油污、油漆自行脫落。因此，在汽車維修中應大力推廣這些新技術。

　　When the cleaning workpiece is immersed in the cleaning solution, the ultrasonic cleaning equipment with strong cavitation effect on the internal and external surface of the workpiece, so it is particularly suitable for complex porous, can not have a hard scrub smooth surface. Abroad also uses microwave cleaning technology, so that the parts that are cleaned fall under the action of microwave, the surface forms cavitation, and then the oil pollution, paint falls off by itself. Therefore, these new technologies should be promoted vigorously in automobile maintenance.

　　以上講解的內容不知道對您有幫助嗎？如果您還存在什么疑惑的話，歡迎通過網站www.55232.cn來咨詢我們，我們這里有的人員為您解惑并為您提出合理的建議。

　　Is the above explanation helpful to you? If you still have any doubts, welcome to consult us through the website www.55232.cn, we have professional staff here to solve your doubts and put forward reasonable suggestions for you.